Var god vänta...
Produkten har lagts till i kundvagnen. Se kundvagnen här
Öppet vardagar 09-17 Kontakta oss
Kundvagnen är tom

CISCO Nexus 7000 F2-Series 48 Port 1

Förstasidan / Nätverk / Switchar / CISCO Nexus 7000 F2-Series 48 Port 1
CISCO Nexus 7000 F2-Series 48 Port 1 (N7K-F248XT-25E=)

CISCO Nexus 7000 F2-Series 48 Port 1

  • Produkt Modul
  • Portar 48
  • Hastighet 10Gbps
317.071,20 ex moms
Förväntad i lager 2020-10-13


Nexus 7000 Enhanced F2-Series 48 Port 1 and 10GBASE-T Ethernet Module, RJ45 (spare)

Cisco Nexus 7000 F2-Series Enhanced 48-Port 1 and 10GBASE-T Ethernet Copper Module

The Cisco Nexus® 7000 Enhanced F2-Series 48-Port 1 and 10GBASE-T Ethernet Copper Module (referred to as the Cisco Nexus 7000 F2e Copper Module in this document) offers outstanding flexibility and wire-rate performance on each port. The module enables the deployment of high-density, low-latency, scalable data center architectures based on the IEEE 802.3an standard, best known as 10GBASE-T.

The Cisco Nexus 7000 Series Switches provide the foundation of the Cisco® Unified Fabric. They are a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks. The fabric architecture scales beyond 15 terabits per second (Tbps) and is designed to support future 40 and 100 Gigabit Ethernet interfaces. To meet the requirements of the most mission-critical network environments, the switches deliver continuous system operations and virtualized services. The Cisco Nexus 7000 Switches is powered by the proven Cisco NX-OS Software operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability. Its innovative unified fabric design is purpose built to support consolidation of IP and storage networks on a single lossless Ethernet fabric.

The Cisco Nexus 7000 F2e-Series Copper Module is built with switch-on-chip (SoC) architecture, in which a single application-specific integrated circuit (ASIC) implements all the module functions, including ingress buffering, forwarding lookup operations, access control lists (ACLs), quality-of-service (QoS) tables, fabric interfaces, and virtual output queuing (VOQ). Each SoC manages four front-panel interfaces. This type of design increases performance while lowering the power and cooling requirements of the module.

Each port of the Cisco Nexus 7000 F2e Copper Module can also be used at 1 Gigabit Ethernet speed, allowing IT departments to migrate their servers base to 10GBASE-T based on the specific needs of their networks. Excellent for end-of-row (EoR) and middle-of-row (MoR) designs, the Cisco Nexus 7000 F2e Copper Module provides flexibility and scalability and a comprehensive feature set.





Product compatibility

• Supported in all Cisco Nexus 7000 Series chassis

Software compatibility

• Cisco NX-OS Software Release 6.1.2 or later (minimum requirement)

Front-panel LEDs

• Status: Green (operational), red (faulty), or orange (module booting)
• Link: Green (port enabled and connected), orange (port disabled), off (port enabled and not connected), or blinking green and orange in conjunction with ID LED blue (port flagged for identification; beacon)
• ID: Blue (operator has flagged this card for identification; beacon) or off (module not flagged)

Programming interfaces

• Scriptable command-line interface (CLI)
• Cisco Data Center Network Manager (DCNM) GUI

Physical Interfaces


• 48 ports of 1 and 10GBASE-T with RJ-45 cabling

Maximum port density

• 768 ports of 1 and 10GBASE-T Ethernet for 18-slot chassis
• 384 ports of 1 and 10GBASE-T Ethernet for 10-slot chassis
• 336 ports of 1 and 10GBASE-T Ethernet for 9-slot chassis
• 96 ports of 1 and 10GBASE-T Ethernet for 4-slot chassis

Queues per port

Configurable template-based queuing modes:

• Ingress (4q1t and 2q1t)
• Egress (1p3q1t, 2p2q1t, and 3p1q1t)

VOQ buffer

• 72 MB per module


• Deficit-Weighted Round-Robin (DWRR)

Jumbo frame support for bridged and routed packets

• Up to 9216 bytes

Switch on a Chip (SoC)


• 720-million packets per second (mpps) Layer 2 and Layer 3 forwarding capacity for both IPv4 and IPv6 packets

MAC address entries

• 16,384 per SoC, and up to 196,608 per module (depending on VLAN allocation)


• 4096 simultaneous VLANs per VDC

IPv4 entries

• 32,768

IPv6 entries

• 16,384

Adjacency entries

• 16,384

Access control lists (ACLs)

• 16,384 per SoC, and up to 196,608 per module (depending on ACL type and interface configuration)


• 1024 per SoC

Control Plane Policing (CPP)

• Supported

Sampled NetFlow

• Up to 256 programmable sampling rates


Physical dimensions

• Occupies one I/O module slot in a Cisco Nexus 7000 Series chassis
• Dimensions (H x W x D): 1.733 x 15.3 x 21.9 in. (4.4 x 38.9 x 55.6 cm)
• Weight: 14 lb (6.3 kg)

Power consumption

• Typical: 420W
• Maximum: 550W

Environmental conditions

• Operating temperature: 32 to 104°F (0 to 40°C)
• Operatiing relative humidity: 5 to 90%, noncondensing
• Storage temperature: -40F to 158°F (-40 to 70°C)
• Storage relative humidity: 5 to 95%, noncondensing

Regulatory compliance

• EMC compliance
• FCC Part 15 (CFR 47) (USA) Class A
• ICES-003 (Canada) Class A
• EN55022 (Europe) Class A
• CISPR22 (International) Class A
• AS/NZS CISPR22 (Australia and New Zealand) Class A
• VCCI (Japan) Class A
• KN22 (Korea) Class A
• CNS13438 (Taiwan) Class A
• EN55024
• EN50082-1
• EN61000-3-2
• EN300 386

Environmental standards

• NEBS criteria levels
• SR-3580 NEBS Level 3 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 5)
• Verizon NEBS compliance
• Telecommunications Carrier Group (TCG) Checklist
• Qwest NEBS requirements
• Telecommunications Carrier Group (TCG) Checklist
• ATT NEBS requirements
• ATT TP76200 level 3 and TCG Checklist
• ETSI 300 019-2-1, Class 1.2 Storage
• ETSI 300 019-2-2, Class 2.3 Transportation
• ETSI 300 019-2-3, Class 3.2 Stationary Use


• UL/CSA/IEC/EN 60950-1 Second Ed
• AS/NZS 60950-1


Cisco Nexus 7000 Series Switches come with the standard Cisco 1-year limited hardware warranty

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel. 08 55 400 300

Copyright © 2020 Dindator