Var god vänta...
Produkten har lagts till i kundvagnen. Se kundvagnen här
Öppet vardagar 09-17 Kontakta oss
Kundvagnen är tom

CISCO CATALYST 4500 4200W AC DUAL INPUT POWER SUPPLY (DATA + POE) EN

Förstasidan Nätverk Nätverkstillbehör CISCO CATALYST 4500 4200W AC DUAL INPUT POWER SUPPLY (DATA + POE) EN
CISCO CATALYST 4500 4200W AC DUAL INPUT POWER SUPPLY (DATA + POE) EN (PWR-C45-4200ACV=)

CISCO CATALYST 4500 4200W AC DUAL INPUT POWER SUPPLY (DATA + POE) EN

Artikelnr:
PWR-C45-4200ACV=
EAN:
882658008566
  • Produkt Nät
33 869:-
27 095,20 ex moms
På lager i butik Ej i lager Leverantörlager Ej i lager
Beskrivning

Cisco Catalyst 4500 Series Power-over-Ethernet Capabilities and Power Supplies

Power over Ethernet on the Cisco Catalyst 4500 E-Series Platform
The Cisco® Catalyst® 4500 E-Series platform offers line cards, power supplies, and accessories (including an AC power shelf) to support 15.4W per port simultaneously on every port in any fully loaded Cisco Catalyst 4500 E-Series switch. Although all references to "Power over Ethernet" (PoE), "inline power," and "voice" power supply and line cards are synonymous, there are only two versions: Cisco prestandard PoE and 802.3af-compliant PoE. Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the IEEE 802.3af standard and the Cisco prestandard power implementation, helping ensure backward compatibility with existing Cisco powered devices.
All Cisco Catalyst 4500 Series PoE line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface card (NIC) to help ensure that power is applied only when an appropriate device is connected. With a Cisco PoE network, administrators can depend on a robust network that is safe to deploy and simple to maintain.

PoE
PoE provides -48-VDC power over standard Category 5 unshielded twisted-pair (UTP) cable up to 100 meters when an IEEE 802.3 af-compliant or Cisco prestandard powered device is attached to the PoE line-card port. Instead of requiring wall power, attached devices such as IP phones, wireless base stations, video cameras, and other IEEE-compliant appliances can use power provided from the Cisco Catalyst 4500 Series PoE line cards. This capability gives network administrators centralized control over power and eliminates the need to install outlets in ceilings and other out-of-the-way places where a powered device can be installed. When a switch is connected to an uninterruptible-power-supply (UPS) system, network administrators can ensure that power outages will not affect network availability.

Deploying PoE on the Cisco Catalyst 4500 E-Series
When the Cisco Catalyst 4500 E-Series is properly configured, implementing PoE is easy when used with a Cisco powered device that supports Cisco Discovery Protocol. All Cisco Catalyst 4500 Series PoE line cards automatically detect an attached powered device the moment they are installed. Moreover, the Cisco Catalyst 4500 Series returns unused port power to the system power budget for use by other devices because it supports the IEEE802.3af optional power classifications.
The Cisco Catalyst 4500 E-Series offers internal power supplies and external power devices for multiple deployment scenarios, including small and large deployments in AC or DC environments for data-only configurations, and scalability up to 15.4W per port for PoE configurations.
The Cisco Catalyst 4510R-E (10 slot), 4507R-E (7 slot), 4506-E (6 slot), and 4503-E (3 slot) models as well as non-E-Series classic chassis share a common power-supply form factor. Each Cisco Catalyst 4500 Series chassis is designed for 1 + 1 power protection while meeting the needs of PoE demands. In addition to power resiliency, the Cisco Catalyst 4500 Series includes 1 + 1 supervisor-engine redundancy (Cisco Catalyst 4507R and 4510R models only) and software-based fault tolerance. Integrated resiliency in both hardware and software minimizes network downtime, helping ensure workforce productivity, profitability, and customer success.

IEEE 802.3af Class

Power Available at the Switch Port

0

15.4W: Default class

1

4W

2

7W

3

15.4W

4

Future expansion

Cisco prestandard PoE

6.3W

 

Standard 802.3af Class 1 (4W per port)

Standard 802.3af Class 2 (7W per port)

Standard 802.3af Classes 0 and 3 (15.4W per port)

Cisco Prestandard (6.3W perport)

1000 WAC

-

-

-

-

1400 WAC

-

-

-

-

1400 WDC

-

-

-

-

1400 WDC (triple input)

-

-

-

-

1300 WAC

144

101

45

113

2800 WAC

192

178

80

198

AC power shelf
(with 1400W-P)

240

318

144

353

2 AC power shelves

384

384

345

384

4200 WAC

384

384

213

384

Cisco Catalyst 4500 E-Series Power-Supply Options: AC and DC
The Cisco Catalyst 4500 E-Series offers a variety of power supplies and accessories to meet the diverse needs of enterprise and service provider customers. All available Cisco Catalyst 4500 Series power supplies can be used for data-only deployments, which typically require just a few hundred watts. For deployments that dictate support for PoE power, Cisco offers several options.
The Cisco Catalyst 4500 E-Series offers AC power with several internal supplies: 1000W (data only), 1400W (data only), 1300W (data and PoE), 2800W (data and PoE), and 4200W (data and PoE). When 5500W or less are required, the 4200W power supply can provide 5500W while protecting the chassis from a power or power-supply sub-unit failure. When more than 5500W of redundant data and PoE are required for a Cisco Catalyst 4500 Series chassis in an AC-powered environment, Cisco offers an external AC power shelf that houses two 2500-WAC power supplies. When two power shelves are combined, they can produce 7500W -- the remaining 2500W supply can be used for N + 1 protection.
The Cisco Catalyst 4500 E-Series has two DC power options -- one is optimized for data-only deployments in service provider central offices (part number PWR-C45-1400DC), and the other is used for high-power PoE deployments (PWR-C45-1400DC-P).

Cisco Catalyst 4500 E-Series External AC Power Shelf and 1400-WDC Power Supply with Integrated Power Entry Module
The Cisco Catalyst 4500 E-Series external AC power shelf must be used in conjunction with the 1400-WDC-P power supply. In addition to providing power for the chassis, fans, and non-PoE line cards, the 1400-WDC power supply contains a power entry module (PEM). The PEM is used to pass additional power through to the chassis backplane -- power demanded by the PoE line cards. The chassis power trace used for PoE is independent from the one used by the supervisor engine(s), fan tray, and backplane components. The 1400-WDC power supply can accept up to 7500 WDC for data and PoE applications. Up to 1400W can be dedicated for data (supervisor[s], fan tray, etc.), while the remaining power is passed through the PEM and is used for PoE.
When only one external AC power shelf is used (with two 2500-WAC power supplies), it provides the 1400-WDC power supply with 5000W of DC power. When two AC power shelves are strapped together, the Cisco Catalyst 4500 Series can provide up to 7500W of DC power (3 + 1 redundant).

Cisco Catalyst 4500 E-Series Service Provider DC Power Supply
The triple-input 1400-WDC power supply is optimized for service provider central-office deployments. By providing multiple inputs, the service provider DC power supply allows central-office technicians to customize the output power to meet their application needs. Many central-office deployments require only a fraction of the 1400W available in the service provider power supply. With low-current inputs, technicians can connect the supply to smaller fuses and breakers. The service provider power supply makes it possible to deploy a Cisco Catalyst 4503 with a single 15A circuit. Likewise, it is possible to deploy a fully populated Cisco Catalyst 4510R with one 15A and two 20A circuits rather than a single 60A connection, which often requires rack rewiring

Cisco Catalyst 4500 E-Series Power Supplies
In any deployment scenario, whether AC or DC, the Cisco Catalyst 4500 Series has the power supplies and external power devices to meet customers' power needs for data, voice, and video applications

Power Supply

1000 WAC (PWR-C45-1000AC)

1400 WAC (PWR-C45-1400AC)

1400W Triple Input DC (PWR-C45-1400DC)

Minimum Cisco IOS® Software Release required

12.1(12c)EW

12.2(18)EW

12.2(25)EW

Minimum Cisco Catalyst Operating System Software required

7.4(1)

-

-

Integrated PoE

No (data only)

No (data only)

No (data only)

IEEE 802.3af compliant

No

No

No

Input current (rated)

12A at 100 VAC

5A at 240 VAC

16A at 100 VAC

7A at 240 VAC

Two -48 VDC at 15A

One -48 VDC at 12.5A

Output current (data)

12V at 83.4A

3.3V at 12.2A

12V at 113.4A

3.3V at 12.2A

12V at 114W

3.3V at 12.5W

Output current (PoE)

-

-

-

Output power redundant mode (data)

1000W + 40W

1360W + 40W

1368W + 40W

Output power redundant mode (PoE)

-

-

-

Output power combined mode (data)

1667W

-

-

Output power combined mode (PoE)

-

-

-

Heat dissipation

943 BTU/hr

1048 BTU/hr

1048 BTU/hr

Holdup time

20 ms

20 ms

4 ms

 

1300 WACV

(PWR C45-1300ACV)

2800 WACV (PWR-C45-2800ACV)

1400 WDC-P (PWR-C45-1400DC-P)

4200 WACV PWR-C45-4200ACV)

2500W

(PWR-4502)

Minimum Cisco IOS® Software Release required

12.1(12c)EW

12.1(12c)EW

12.1(13)EW

12.2

12.1(13)EW

Minimum Cisco Catalyst Operating System Software required

7.4(1)

7.4(1)

7.5(1)

-

7.5(1)

Integrated PoE

Yes (up to 800W)

Yes (up to 1400W)

Up to 7500W (minus power consumed for data) when connected directly to DC power plant or 2 external AC power shelves

Yes (up to 3855W)

2500W per power supply

IEEE 802.3af compliant

Yes

Yes

Yes

Yes

Yes

Input current (rated)

16A at 100 VAC

7A at 240 VAC

16A at 200 VAC

Data: 31A at -60 VDC

Inline: 180A at

-48VDC

Two 12A at 100 VAC or

Two 12A at 200 VAC

15A at 200 VAC

Output current (data)

12V at 84.7A

3.3V at 12.5A

12V at 113.3A

3.3V at 12.1A

12V at 120A

3.3V at 10A

12V at 115.3A

3.3V at 12.5A

-52 VDC at 50A (total output per supply)

Output current (PoE)

-50V at 16.7A

-50V at 28A

-48 or -60 VDC at 140A

-50V at 77.1A (200V)

-50V at 38A (100V)

-52 VDC at 50A (total output per supply)

Output power redundant mode (data)

1000W + 40W

1360W + 40W

1367W + 40W

1383W + 40W

Up to 1400W (through DC supply)

Output power redundant mode (PoE)

800W maximum per power supply

1400W maximum per power supply

Up to 7500W (minus the power consumed for data)

3700W (220V)

1850W (110V)

2500W per supply (minus the power consumed for data)

Output power combined mode (data)

1360W

1360W

1360W

1360W

1360W

Output power combined mode (PoE)

1333W (maximum)

2333W

7280W

6800W (220V)

3100W (110V)

-

Heat dissipation

1568 BTU/hour

2387 BTU/hr

Data only: 1591 BTU/hr

Data and voice: 2905 BTU/hr

3580 BTU/hr

1210 BTU/hr per power supply

Holdup time

20 ms

20 ms

4 ms

20 ms

20 ms

Number of 802.3af class 2 powered devices supported

102

179

384

384 (200V)

241 (100V)

318 (per unit)

Number of 802.3af classes 0 and 3 powered devices supported

46

80

384

213 (200V)

109 (100V)

144 (per unit)

Feature

Description

Power-supply indicators and interfaces

• Fan cooling: Integrated in hot-inserting or hot-extraction unit
• Good: Green
• Fail: Red
• Support for Simple Network Management Protocol (SNMP) MIB

Environmental conditions

• Operating temperature: 32 to 104ºF (0 to 40ºC)
• Storage temperature: -40 to 167ºF (-40 to 75ºC)
• Relative humidity: 10 to 90 percent, noncondensing
• Operating altitude: -60 to 2000m

Regulatory Standards Compliance

Safety

• UL 60950
• CAN/CSA-C22.2 No. 60950
• EN 60950
• IEC 60950
• TS 001
• AS/NZS 3260

Electromagnetic Compatibility (EMC)

• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• EN55022 Class A
• CISPR22 Class A
• AS/NZS 3548 Class A
• VCCI Class A
• EN 55022
• EN 55024
• EN 61000-6-1
• EN 50082-1
• EN 61000-3-2
• EN 61000-3-3
• ETS 300 386

Industry EMC, safety, and environmental standards

• GR-63-Core Network Equipment Building Standards (NEBS) Level 3
• GR-1089-Core Level 3
• ETS 300 019 Storage Class 1.1
• ETS 300 019 Transportation Class 2.3 (pending)
• ETS 300 019 Stationary Use Class 3.1
• ETS 300 386

Warranty

The warranty for the Cisco Catalyst 4500 Series is 90 days; it includes hardware replacement with a 10-day turnaround from return materials authorization (RMA).

Service and support

Cisco offers lifecycle service and support for the Cisco Catalyst 4500 Series, directly and for resale through Cisco distributors. From implementation to operation and optimization, Cisco offers advanced service and technical support.

Advanced service

Cisco Total Implementation Solutions (TIS) offers a full range of implementation solutions, including project management, project engineering, configuration, and staging and rollout coordination; Cisco TIS helps ensure correct installation and deployment. For more information about Cisco TIS, visit: http://www.cisco.com/en/US/partner/products/svcs/ps11/services_segment_category_home.html.

Technical support

Cisco SMARTnet® Online and telephone support augments the customer's operations-staff resources. Support includes the ability to refresh system software at will as well as a range of Advance Replacement hardware options. Cisco SMARTnet Onsite support adds the services of a field engineer, services that can be critical when customer staffing is insufficient or unavailable for parts-replacement activities. For more information about Cisco SMARTnet support, visit: http://www.cisco.com/en/US/partner/products/svcs/ps3034/serv_category_home.html.

Part Number

Product Name

PWR-C45-1000AC

Cisco Catalyst 4500 1000 WAC Power Supply (data only)

PWR-C45-1400AC

Cisco Catalyst 4500 1400 WAC Power Supply (data only)

PWR-C45-1300ACV

Cisco Catalyst 4500 1300 WAC Power Supply (PoE)

PWR-C45-2800ACV

Cisco Catalyst 4500 2800 WAC Power Supply (PoE)

PWR-C45-1400DC-P

Cisco Catalyst 4500 1400 WDC Power Supply with PEM (PoE)

PWR-C45-4200ACV

Cisco Catalyst 4500 4200 WAC Power Supply (PoE)

PWR-C45-1400DC

Cisco Catalyst 4500 1400 WDC SP Central-Office Power Supply (triple input)

External AC Power Shelf and Accessories

WS-P4502-1PSU

Cisco Catalyst 4500 Auxiliary Power Shelf (2 slot), including 1 (part number PWR-4502)

PWR-4502

Cisco Catalyst 4500 Auxiliary Power Shelf Redundant Power Supply

CAB-4502-DC-2M

Cisco Catalyst 4500 2 meter DC Cable set for auxiliary power shelf

CAB-4502-DC-60CM

Cisco Catalyst 4500 60 cm DC Cable set for auxiliary power shelf

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.


info@dindator.se 08 55 400 300

Copyright © 2024 Dindator